JSEA RM-12/SCS Health & Safety Management System
Paints, Fillers, Solvents & Hazardous Substances
Responsive Maintenance · Rev 1.0 · Approved master — controlled document
HIGH
Task steps, hazards and controls
Swipe or step through on mobile
| Step | Hazards | Controls |
|---|---|---|
| Plan and check the product | Unknown hazards, incompatible products, occupant sensitivity | Review the SDS, select the least hazardous product, check the substance register, confirm occupant health considerations |
| Transport and store | Spills in vehicles, fire risk, unauthorised access | Upright and restrained transport, bunded lockable storage, away from ignition sources and heat, no storage in occupied living areas |
| Use and decant | Skin and eye contact, inhalation of vapours, splash, fire | Gloves and goggles, A2 RPE for solvents, decant in ventilated areas over a bund, no smoking or hot work nearby, keep lids closed |
| Spill response and disposal | Environmental discharge, slips, contaminated waste | Spill kit on site and used immediately, no discharge to drains, waste returned for lawful disposal, containers sealed and removed from site |
Step 1 of 4
Plan and check the product
Hazards
Unknown hazards, incompatible products, occupant sensitivity
Critical controls
Review the SDS, select the least hazardous product, check the substance register, confirm occupant health considerations
Critical controls
- Current SDS available on site and controls applied before first use of a product
- Ventilation maintained and vapours kept away from occupants
- Substances kept in labelled containers, locked and never left accessible to occupants or children
Minimum PPE
Nitrile glovesSplash gogglesA2 organic vapour RPE for solvent productsCoveralls or apronSafety footwear
Sign-on register
0 signature(s) this session
No workers signed on yet in this session.